{"id":1844,"date":"2020-11-16T10:59:39","date_gmt":"2020-11-16T15:59:39","guid":{"rendered":"https:\/\/blog.sailrite.com\/meet-our-customers\/?p=1844"},"modified":"2023-02-03T11:14:43","modified_gmt":"2023-02-03T16:14:43","slug":"diy-boat-cushion-cockpit","status":"publish","type":"post","link":"https:\/\/blog.sailrite.com\/meet-our-customers\/marine\/diy-boat-cushion-cockpit\/","title":{"rendered":"Regina Fuller: A DIY Success Story"},"content":{"rendered":"

To DIY or not to DIY \u2014 is that even a question!? Not for enthusiastic sewer Regina Fuller. Though she’s new to sewing, she’s full of that can-do spirit that lives and thrives in all sewers and makers. Regina and her husband, Jacob, purchased a fixer-upper NorSea 27 sailboat. The boat needed major restoration, from helm to hull and everything in between. Regina knew it was going to be a big project, and while her husband did the brunt of the work, she wanted to contribute to the boat’s revamp in a tangible way. She decided to sew new cushions for the interior cabin and exterior cockpit, even though she’d never done upholstery work before. With the help of Sailrite’s supplies and how-to videos, she was able to successfully complete her cushion projects with great results.<\/span><\/p>\n

Regina learned to sew at a young age, but she never really caught the sewing bug. “<\/span>My mom taught me the basics of sewing when I was a kid, but I never really took to it. As an adult, I could mend clothes and made a bed skirt once, but that was about the extent of my sewing experience.” Even with such minimal practice, and not having touched a sewing machine in years, Regina was ready to take on her first upholstery project. First up were the cushions for the boat’s cabin. She used a home sewing machine for the project and followed Sailrite’s “How to Make V-Berth Cushions<\/span><\/a><\/strong>” how-to video. Though she had a couple of small struggles, she completed the cushions and was thrilled with the end product.<\/span><\/p>\n

\"Jake
Jacob and Regina Fuller enjoying some much-deserved time on the water.<\/figcaption><\/figure>\n

For the cockpit cushions, she knew her home sewing machine wouldn’t be able to handle the thickness of the vinyl and piping. So Regina turned to Sailrite again. After thorough research and consideration, she invested in the Ultrafeed\u00ae LSZ. Her delight and excitement at how the cockpit cushions turned out speak volumes. The right tools and supplies make all the difference. What’s Regina’s favorite part about sewing and DIY? “The end product! There is a lot of satisfaction in knowing that you made something that you and your family get to enjoy for years.”\u00a0<\/span><\/p>\n

Join us as we learn more about this determined DIYer, her family’s sailing lifestyle, and what she’s learned from her sewing experiences so far.<\/span><\/p>\n

Q. When and how did you learn to sail?<\/b> <\/span><\/p>\n

A. My husband is a skilled sailor and has been sailing since he was a kid. He took me sailing on our second date and I fell in love with him and sailing! We live in Humboldt County, California, so we sail primarily in Humboldt Bay.\u00a0When we have vacation time, we like to trailer our sailboat to the San Juan Islands in Washington or Clearlake, California.\u00a0\u00a0<\/span><\/p>\n

Q. What do you love about sailing?<\/b>\u00a0 <\/span><\/p>\n

A. Everything! The wind, the fresh air and the wildlife you see in the bay. Our boat is a mini floating home and we often stay the weekend on it.\u00a0I love being confined to the boat where you aren’t distracted by house chores and other worries of the world. The soft lull of the sea is so relaxing.\u00a0We have two teenage boys ages 13 and 16.\u00a0At this age, they just want to be with their friends or on electronics.\u00a0We love stealing them away from all of that and getting them on the boat. There is nothing better than being hunkered down inside playing Yahtzee and drinking hot chocolate or sailing in 15+ knot winds using all their skills to have a successful sail.\u00a0I have so many amazing moments and memories over the past 20 years on one of our sailboats.\u00a0<\/span><\/p>\n

\"\"
The Nor’Sea 27 fixer-upper. Just wait till you see the “after” photos!<\/figcaption><\/figure>\n

Q. Can you tell us what all was involved in your big Nor’Sea restoration project? <\/b>\u00a0<\/span><\/p>\n

A. My husband has always wanted a Nor’Sea 27. We’ve had two other monohulls over the years, and some Hobie Cats and daysailers, but never a Nor’Sea. It’s a seaworthy classic sailboat that can be put on a trailer and taken to any sailing grounds you want. Over the years he has seen them for sale, but not at a price point we could afford and usually located states away. Five years ago, one came up for sale only 45 minutes away from our home. He took me to see it and I thought he was crazy. Yes, it was only $5,000, but the amount of work it needed was more than I had a vision for. We have renovated two homes and built a third, so I knew he had the skills and determination to see it through. But this time I didn’t see how it would be possible that I’d ever want to stay a night on this boat. Five years later he proved me wrong and all I want to do every weekend is go to the boat. We named the boat “Zephyr” and launched her for the first time in June 2020.\u00a0<\/span><\/p>\n

This slideshow requires JavaScript.<\/p>

<\/div>\n

Almost everything had to be done.\u00a0He had a new gas tank made and he installed it. He put in a newer diesel engine and redid the plumbing and electrical.\u00a0He renovated the hanging locker on the port side in order to install a propane heater.\u00a0He gutted the galley and installed all new appliances and customized the galley to maximize the space and fit my dishes.\u00a0He gutted the starboard side navigation station and turned it into shelving and settee \u2014 painted, sanded and restored woodwork.\u00a0On the outside, he sanded and painted, built the bowsprit, and installed some new rigging and\u00a0lifelines.\u00a0\u00a0<\/span><\/p>\n

Right now he is restoring the trailer and I’m planning to make a bimini.\u00a0We plan to pull the boat back out in the winter for a few more improvements.\u00a0Given all the blood, sweat and tears that he put into this renovation, I was determined to make a contribution by making the cushions.\u00a0We thought about paying someone to do it, but I really wanted to be able to say that I put some time, energy and skill into our dream boat as well.\u00a0The cushions were the sprinkles on the cake to make his beautiful restoration look complete.\u00a0\u00a0<\/span><\/p>\n

This slideshow requires JavaScript.<\/p>

<\/div>\n

Q. What made you decide on an Ultrafeed Sewing Machine? What specific qualities were you looking for in a sewing machine?<\/b> <\/span><\/p>\n

A. I used a “heavy duty” inexpensive Singer sewing machine for the inside cabin cushions. I was afraid to invest in a quality upholstery machine when I didn’t know if I would even be able to successfully make the cushions. I broke several needles pushing through that project. After successfully making those cushions and realizing that I had enough skill to really do this, I knew I had to invest in a quality machine if I planned to make the cockpit cushions with piping and vinyl. There was no way my other machine would do it. I needed it to be able to easily go through several layers of heavy-duty canvas or vinyl.\u00a0<\/span><\/p>\n

I looked at several heavy duty upholstery machines. Sailrite had a quality product for a very reasonable price.\u00a0I ultimately decided to purchase the Ultrafeed because my experience to date with Sailrite has been exceptional. I love all the how-to videos and online tools to help me decide on the best materials for my projects. The Ultrafeed sewed the vinyl and piping like it was cutting through butter. I couldn’t be happier with it.\u00a0I have really appreciated the short tutorials to help me understand how to thread the machine, wind the bobbin, and provide general care for the machine.\u00a0All the Ultrafeed videos have been really thorough and helpful.<\/span><\/p>\n

\"cockpit
Cockpit cushions before and after.<\/figcaption><\/figure>\n

Q. Now that you’ve been practicing and have sewn a few projects, have you learned any sewing tips along the way that you’d like to share?<\/b><\/span><\/p>\n

A. I do have an important tip to share from my experience. When using the seam ripper on the zipper plate, use the plastic tip side down to rip after you get it started. I accidentally ripped my fabric when I continued to use the sharp side down \u2014 it’s a real bummer to rip it for so many reasons. <\/span><\/p>\n

Here are all my take-aways from my vinyl cockpit cushion project:\u00a0 <\/span><\/p>\n

1) Definitely use the basting tape to help keep the vinyl from puckering when attaching it to the piping. It will make it SO much easier to line everything up nicely when sewing the plaque on. Your how-to video recommends it, but I tried the first panel without it and wished I had listened to your recommendations. I used the basting tape on everything after that.\u00a0 <\/span><\/p>\n

2) If using the YKK\u00ae AquaGuard\u00ae Water Repellent Zipper, don’t forget to sew it into the zipper plaque the opposite way you would for a regular zipper. I totally forgot about this and sewed it in wrong and threaded the pull on like you would a normal zipper. Of course it wouldn’t zip closed and didn’t work. I thought the zipper was a joke. I went back to the Sailrite website and found a video tutorial about this zipper, and that’s when I realized I did it all wrong. Once I got it sewed correctly it worked like a dream!\u00a0 <\/span><\/p>\n

3) I used closed cell foam for the cockpit cushions for its flotation. Closed cell foam is very different to work with than the interior foam I used for the cabin cushions.\u00a0When cutting out the fabric and foam, I used the same allowance for my seams and compressing the foam that I did for the interior cushions.\u00a0When I finished the first one and put the foam inside, I was so disappointed. It was extremely loose.\u00a0The correct fix would have been to cut the foam out larger; however, I had already cut the foam for two of the cushions and there was really no way to easily add another 1\/2 inch of foam to all sides. So I ended up tearing apart the cushion cover, cutting it down, and re-sewing.\u00a0 Although it ended up being 1 inch shorter than my original pattern, you wouldn’t be able to tell. It still looks nice in the cockpit.\u00a0I had a few other cushions to make that I hadn’t cut the foam for yet, so those turned out nice and exactly to pattern.<\/span><\/p>\n

\"boat
The beautiful Zephyr fully restored and ready for launch.<\/figcaption><\/figure>\n

Q. What advice would you give to a brand-new sewer or someone thinking about getting into sewing?<\/b>\u00a0 <\/span><\/p>\n

A. You can do it. The Sailrite videos teach you everything you need to be successful. If you know you want to complete upholstery projects, then invest in a quality machine from the start. By having a quality machine, your very first project will be easier, which will help build your confidence.\u00a0\u00a0<\/span><\/p>\n

Q. Is there anything else you’d like our readers to know about your sewing, sailing lifestyle or yourself in general?<\/b> <\/span><\/p>\n

A. My motivation in entering to be a featured customer was to hopefully inspire others.\u00a0I had only basic\/limited sewing skills and I’m so proud of what I have accomplished with my first few projects.\u00a0I hope others see this story and take the plunge in trying something new. My success was truly due to the excellent tutorials, materials and equipment offered by Sailrite.\u00a0<\/span><\/p>\n

Now that Regina has conquered the boat cushions, she’s ready to put her new skills and her new machine to work again. Next up, she plans on sewing a bimini for their newly restored boat. She also wants to learn how to do sail repair (perfect for the Ultrafeed LSZ) and wants to sew duffle bags from used sailcloth \u2014 a great way to reuse and upcycle used sails! With an ever-growing project list, we’re thrilled that we could be a part of Regina’s sewing and DIY journey. Good luck with all your future sewing projects, Regina! We know you’ll do great!<\/span><\/p>\n

\"Regina
The whole family (from left: Ethan, Regina, Buster, Hunter, Jacob and Joshua) playing Yahtzee aboard Zephyr.<\/figcaption><\/figure>\n

 <\/p>\n

Who We Are<\/b><\/span><\/h3>\n

Sailrite is your one-stop DIY shop! We are a passionate crew of do-it-yourselfers who strive to equip you with the supplies and how-to knowledge you need to tackle your next project. Do you want to learn upholstery, leatherwork, canvaswork, hobby sewing, bag making or more? We have the fabric, tools, hardware, sewing machines and notions you need to master any DIY. And even if you’ve never sewn before, our tutorials and how-to videos are designed for beginners and experienced crafters alike.<\/span><\/p>\n

Start your DIY journey today: www.sailrite.com<\/span><\/a><\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

Read how Sailrite customer Regina Fuller used Sailrite resources to sew beautiful cockpit and cabin cushions for her family’s sailboat.<\/p>\n","protected":false},"author":3,"featured_media":1848,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"jetpack_publicize_message":"","jetpack_is_tweetstorm":false,"jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","enabled":false}}},"categories":[2],"tags":[27,29,26,28,19,20,37,70,25],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-content\/uploads\/2020\/11\/Z1-Family-Pic.jpg","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/padSoq-tK","jetpack-related-posts":[{"id":1361,"url":"https:\/\/blog.sailrite.com\/meet-our-customers\/marine\/sewing-boat-marina-ultrafeed\/","url_meta":{"origin":1844,"position":0},"title":"Marina Hopping With the Ultrafeed\u00ae","date":"March 9, 2020","format":false,"excerpt":"If you've ever been dissatisfied working in the corporate world, you're not alone. Susan Oschmann left her job at a stuffy law firm to rediscover a life that she loved and that would bring her joy, fulfillment and a much-needed sense of accomplishment. With ingenuity and great determination, she set\u2026","rel":"","context":"In "Marine"","img":{"alt_text":"susan on boat at marina","src":"https:\/\/i0.wp.com\/blog.sailrite.com\/meet-our-customers\/wp-content\/uploads\/2020\/02\/susan-bimini.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":802,"url":"https:\/\/blog.sailrite.com\/meet-our-customers\/marine\/seeking-the-blue-tales-of-a-lifelong-sailor\/","url_meta":{"origin":1844,"position":1},"title":"Seeking the Blue: Tales of a Lifelong Sailor","date":"June 10, 2019","format":false,"excerpt":"Sailing, sand and sun have been a part of Sailrite\u00ae customer Marina Batham\u2019s life from the very beginning. Born on Tortola, the largest of the British Virgin Islands in the Caribbean, Marina grew up \u201cin the life\u201d \u2014 the sailing life, that is. Learn how Marina\u2019s two favorite hobbies, sailing\u2026","rel":"","context":"In "Marine"","img":{"alt_text":"","src":"https:\/\/i0.wp.com\/blog.sailrite.com\/meet-our-customers\/wp-content\/uploads\/2019\/05\/seeking-the-blue-boat.png?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":54,"url":"https:\/\/blog.sailrite.com\/meet-our-customers\/marine\/discovering-a-love-for-sailing-sewing\/","url_meta":{"origin":1844,"position":2},"title":"Discovering a Love for Sailing & Sewing","date":"January 21, 2014","format":false,"excerpt":"Sailrite customer Christine Rasmussen was neither a sailor nor a sewer, but after a seemingly fated purchase of a used sailboat, she learned her capability to be both. Christine always had a desire to learn how to sail. However, living in landlocked Durham, North Carolina, didn\u2019t make sailing an easy\u2026","rel":"","context":"In "Marine"","img":{"alt_text":"Christine-R-Collage","src":"https:\/\/i0.wp.com\/www.sailrite.com\/meet-our-customers\/wp-content\/uploads\/2018\/08\/christine-r-collage.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":1625,"url":"https:\/\/blog.sailrite.com\/meet-our-customers\/marine\/sewing-boating-ultrafeed\/","url_meta":{"origin":1844,"position":3},"title":"Sewing for the Boating Life","date":"August 24, 2020","format":false,"excerpt":"Though not raised in a boating family, Laura Weller-Brophy has a very unique and interesting job in the marine industry. She co-owns a boat club that maintains a fleet of boats that the members have unlimited use of during boating season. \"This is the perfect way to get on the\u2026","rel":"","context":"In "Marine"","img":{"alt_text":"","src":"https:\/\/i0.wp.com\/blog.sailrite.com\/meet-our-customers\/wp-content\/uploads\/2020\/08\/bimini2.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":2381,"url":"https:\/\/blog.sailrite.com\/meet-our-customers\/outdoor-living\/ultrafeed-sewing-patio-enclosure\/","url_meta":{"origin":1844,"position":4},"title":"Creative Quarantine DIYs With the Ultrafeed\u00ae","date":"March 11, 2022","format":false,"excerpt":"David Thiesmeyer isn't new to the DIY world. He tackled his first big sewing project \u2014 a mainsail cover for his sailboat \u2014 well over 10 years ago. He considers himself a \u201cDIY type of person\u201d and takes pride in sewing great projects. His most unique creation was not sailing-related\u2026","rel":"","context":"In "Marine"","img":{"alt_text":"The enclosure project David made for his daughter's deck using Sailrite supplies.","src":"https:\/\/i0.wp.com\/blog.sailrite.com\/meet-our-customers\/wp-content\/uploads\/2022\/03\/IMG_20201206_145837521-5fce955690aa8.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]},{"id":2195,"url":"https:\/\/blog.sailrite.com\/meet-our-customers\/marine\/diy-winter-boat-cover-ultrafeed\/","url_meta":{"origin":1844,"position":5},"title":"Ultrafeed\u00ae Adventures: Sewing a Winter Boat Cover","date":"November 19, 2021","format":false,"excerpt":"Dianne Smock learned to sew at a young age but never considered herself an experienced sewist. That is, until she tackled the project of a lifetime \u2014 a winter sailboat cover for her Bayfield 32, named Tilgata. For such a large-scale and heavy-duty project, she needed something tougher than her\u2026","rel":"","context":"In "Marine"","img":{"alt_text":"","src":"https:\/\/i0.wp.com\/blog.sailrite.com\/meet-our-customers\/wp-content\/uploads\/2021\/11\/finished-cover.jpg?resize=350%2C200&ssl=1","width":350,"height":200},"classes":[]}],"_links":{"self":[{"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/posts\/1844"}],"collection":[{"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/comments?post=1844"}],"version-history":[{"count":15,"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/posts\/1844\/revisions"}],"predecessor-version":[{"id":2743,"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/posts\/1844\/revisions\/2743"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/media\/1848"}],"wp:attachment":[{"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/media?parent=1844"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/categories?post=1844"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blog.sailrite.com\/meet-our-customers\/wp-json\/wp\/v2\/tags?post=1844"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}